Your basement will likely need to be fitted with additional wires to support more lights and electronics. You will need to hire a licensed electrician if you plan to install additional overhead light fixtures, outlets and other components that require additional wiring. The cost of electrical installations depends on the exact project, but licensed electricians tend to charge between $50 and $100 per hour.
Any project involving electrical, plumbing, or turning the basement into a livable space, requires permits. Plumbing must be done to code for proper drainage to avoid health issues. It also has to ensure flushing certain waste back into the sewer. Electrical issues can cause short-circuits, blown breakers, and fires. The chance of something happening increases if installation is not done properly from the start, including acquiring the proper permits. If creating a bedroom or other regular living space, permits are required. Emergency escape avenues (for fire and other emergencies) need to be in place as well.
Get estimates from several companies; request and check references. Understand exactly what is (and isn't) included in each estimate, and whether the contractor will do the paperwork for required building permits. Ask about the contractor's length and type of experience, especially if there's anything unusual about your project. Be sure a company is properly bonded and insured and licensed in your state[10] . See if there are any complaints with the Better Business Bureau[11] .
Installing all of the necessary plumbing and electrical work while walls and floors are unfinished will result in savings.Starting from scratch doesn't require demolition, which can save you around $2,000. Framing may be necessary to define rooms and spaces. System upgrades usually call for minor expansions to the HVAC and electrical systems, but not adding plumbing. The bulk of the cost, however, is in flooring and finishing. After wrapping things up with carpeting, drywall, and ceiling material, you can expect to pay anywhere from $6,500 to $15,500.
Installing a bathroom in a basement costs more than installing a bathroom above ground. Costs can range from $2,500 to $5,000 on average, depending on the number of fixtures and whether the plumbing must be installed from scratch or if it’s roughed in already. Basement plumbing requires special considerations to ensure proper drainage and tie-in with the main sewer line, which may not be deep enough to allow the basement bathroom plumbing to use gravity the way above-ground plumbing does. Virgil Miranda’s Construction subcontracts all plumbing work. Miranda says that sometimes the toilet alone in a basement can cost up to $2,500 because sometimes homeowners need to invest in a toilet that does not use gravity but instead a macerating function to grind waste down to prevent clogging. Miranda estimates that each bathroom fixture in a basement costs $800–$900 on average, so a full, three-piece bath could cost $3,000 for the fixtures alone. Adding a kitchenette or wet bar sink adds more to overall refinishing costs. In addition, some basements require a French drain with one or more sump pumps, which can cost up to $10,000 on average, depending on how much ground the drain covers.
Bedrooms – A common strategy is to set up a couple of extra bedrooms in the basement for guests. This is especially beneficial for families that love to entertain on a regular basis. You can easily have guests stay over without disrupting the family space above. Basement bedrooms can also come in handy if you have older kids that cannot share bedrooms any more. Plus, you could also add a small kitchenette and bathroom for convenience.
Because basements are usually below ground level, water seepage and moisture issues have to be resolved before construction can start. Prior to creating a project bid, most contractors will inspect the area to check the interior floor and walls for dampness and make sure the exterior of the foundation is in good shape. Depending on how watertight the basement and foundation are, it may be necessary to protect the basement from future water damage after it’s finished, often through the installation of sump pumps. This work can cost anywhere from $700-$3,000, depending on what needs to be done. Learn more about basement waterproofing. To help prevent moisture problems, homeowners can clear downspouts and gutters of debris to ensure that they help keep moisture away from the foundation.
Hardwood, laminate and tile flooring significantly increase the cost to finish a basement. Sebring, who calls carpet “the king of basement flooring,” says many people are scared about the consequences if a carpeted basement floods. But even top-of-the-line vinyl and tile has to be pulled up if there’s serious water damage, he says, and you can replace carpet multiple times for the same cost of installing hard flooring once.

Since this basement is not entirely underground - it includes a walk-out entrance on one side -- new egress windows bring natural light into the basement. A simple Roman shade in fun fabric softens the space and brings all the colors of the room together. Egress windows provide an emergency exit; most building codes require one in every bedroom and in habitable basements. Adding one will likely increase the value of a home, as it provides safety, natural light, and increased airflow.
×